Anycubic Bio Resin
Product Features
●Less Irritating
● Eco-Friendly & Body-Friendly
● Minimal Odor, Maximum Assurance
● High Precision Fusion of Toughness and Resilience
₨ 16,000
Share:
Product Description
Instructions for Use
(1) Before use:
Shake the liquid resin before use;Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements;Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers,tweezers,containers,gloves;ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
Remove the printed model from the molding platform with a blade; Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then takenout and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.Proper processing, such as removing support, polishing, coloring, etc.
(5) Wastewater post-process:
A. Do not discharge wastewater directly into the sewer to avoid contaminating groundwater.
B. Heat the wastewater,let most of the water evaprorate,and then discard the residue after curing by curing machine and sunlight.
Precautions
1.The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light
to avoid high temperature or sunlight.
2.Suggested operating temperature is 18-35℃, and a low temperature may affect the printing effect, thus, the
resin can be properly preheated before use (not more than 60°C).
3.If the resin pigment settles, it can be used after stirring or shaking.
4.In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
5.To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
6.To ensure the ideal performance of the curable material it is necessary to control the intensity and time of the light source after curing.Therefore,
The following steps are recommended:
(1) The intensity of mercury lamp or LED light source is 5-10mW/m2,and the duration is no more than 1hour (self-regulation):
(2) The exposure time in the sun (summer)is around 1 hour;
(3) Proximity or long -term exposure under strong light sources such as high power high-pressure mercury lamps is prohibited
(4) It is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.
(5) To avoid yellowing caused by long-term curing of High Clear Resin, please reduce the exposure time by half compared with other resin colors.
(6) Black resin may appear partially transparent in thin walls (<0.5mm), so the greater thickness can achieve better color effects.
Related Products
Related products
Anycubic High Speed Resin 2.0
₨ 12,000
Anycubic Standard Resin
₨ 8,800
