Anycubic Water-Wash Resin+
- No Alcohol Needed, User-Friendly
- Low Viscosity, Fast Printing
- Test Approval, No Cracks
- Wide Compatibility
₨ 11,000
Share:
Product Description
Highlight
- No Alcohol Needed, User-Friendly:Â Easy to clean, rinse 3D prints with water instead of alcohol, so save your time and budget.
- Low Viscosity, Fast Printing:Â Low viscosity of the resin means it has great fluidity and requires shorter exposure time during the printing process, which helps to improve printing speed.
- Test Approval, No Cracks:Â An upgraded formula to prevent models from cracking. Experimental results in Anycubic lab prove that the performance of the 3d models printed with Anycubic Water-Wash Resin+ is stable, and can be placed for a long time without cracking.
- Wide Compatibility:Â Compatible with 365-405nm wide band, suitable for processing animation, cultural and creative hand-made models, detailed models and prototypes, etc.
Instructions for Use
(1) Before use:
Shake the liquid resin before use; Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements; Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers,tweezers,containers,gloves;ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade;
B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken
out and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
C. Proper processing, such as removing support, polishing, coloring, etc.
Precautions
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
- Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
- If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
(1) The intensity of mercury lamp or Led light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
(4) lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive
material.
Related Products
Related products
Anycubic Bio Resin
₨ 16,000
Anycubic Standard Resin
₨ 8,800
